ISO 13919-2:2021, Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 2: Aluminium, magnesium and their alloys and pure copper (90.20)
ISO 14171:2016, Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification (90.20)
ISO 15792-3:2011, Welding consumables — Test methods — Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld (90.20)
ISO 17279-3:2021, Welding — Micro joining of second generation high temperature superconductors — Part 3: Test methods for joints (90.20)
ISO 17533:2015, Welding for aerospace applications — Welding information in design documents (90.20)
ISO 17677-1:2021, Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding (90.20)
ISO 17777:2016, Welding consumables — Covered electrodes for manual metal arc welding of copper and copper alloys — Classification (90.20)
ISO 18595:2021, Resistance welding — Spot welding of aluminium and aluminium alloys — Weldability, welding and testing (90.20)
ISO 19288:2016, Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys — Classification (90.20)
ISO 22608:2021, Protective clothing — Protection against liquid chemicals — Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials (90.20)
ISO 23493:2020, Welding and allied processes — Process specification for laser-arc hybrid welding for metallic materials (90.20)
ISO 23598:2021, Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints (90.20)
ISO 2503:2009, Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (90.20)
ISO 5172:2006, Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and tests (90.20)
ISO 5179:2021, Investigation of brazeability with spreading and gap-filling test (90.20)
ISO 6848:2015, Arc welding and cutting — Nonconsumable tungsten electrodes — Classification (90.20)
ISO 8205:2021, Resistance welding equipment — Water-cooled secondary connection cables (90.20)
ISO 9539:2010, Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes (90.20)
EN 420:2003/FprA1, Protective gloves - General requirements and test methods (50.97)
EN 659:2003/prA1, Protective gloves for firefighters (50.97)
FprEN ISO 374-5, Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO/FDIS 374-5:2024) (50.60)
ISO/DTS 8182.2, Welding and allied processes — Guidelines for the use of the welding parameters related to the welding energy for qualification and specification of welding procedures (50.00)
ISO/FDIS 11612, Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements (50.00)
ISO/FDIS 14116, Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing (50.00)
ISO/FDIS 14460, Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods (50.00)
ISO/FDIS 18491, Welding and allied processes — Measurement of arc energies (50.00)
ISO/FDIS 5183-1, Resistance welding equipment — Electrode adaptors, male taper 1:10 — Part 1: Conical fixing, taper 1:10 (50.00)
ISO/PRF 18275, Welding consumables — Covered electrodes for manual metal arc welding of high-strength steels — Classification (50.00)
FprEN 659, Protective gloves for firefighters (45.99)
ISO/DIS 15614-1, Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (40.99)
ISO/DIS 22610, Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment — Test method to determine the resistance to wet bacterial penetration (40.99)
CEN/TC 121 N 69, Welded butt joints in metallic materials - Bend tests (40.97)
EN 388:2016/prA1:2018, Protective gloves against mechanical risks (40.97)
prEN 12517, Non destructive examination of welds - Radiographic examination of welded joints in steel - Acceptance level (40.97)
EN 407:2020/prA1, Protective gloves and other hand protective equipments against thermal risks (heat and/or fire) (40.60)
ISO/DIS 11177, Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing (40.60)
ISO/DIS 16602-1, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 1: General requirements (40.60)
ISO/DIS 16602-2, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 2: Physical test methods, classification and requirements (40.60)
ISO/DIS 16602-3, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 3: Chemical test methods, classification and requirements (40.60)
ISO/DIS 16602-4, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 4: Test methods, classification and requirements for specific designs and ensemble components including gloves, footwear, and respirators (40.60)
ISO/DIS 16602-5, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 5: Garment test methods, classification and requirements (40.60)
ISO/DIS 16602-6, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 6: Guidance for Selection, Use, Care and Maintenance (40.60)
ISO/DIS 20384, Surgical clothing and drapes — Requirements and test methods (40.60)
ISO/DIS 22615, Protective clothing — Performance requirements and test methods for protective clothing against infective agents (40.60)
ISO/DIS 27065, Protective clothing — Performance requirements for protective garments worn by operators applying pesticides and for re-entry workers (40.60)
ISO/DIS 28706-2, Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (40.60)
ISO/DIS 4531, Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits (40.60)
ISO/DIS 8207, Gas welding equipment — Specification for hose assemblies for equipment for welding, cutting and allied processes (40.60)
ISO/DIS 9606, Qualification testing of welders — Fusion welding (40.60)
prEN 12477, Protective gloves for welders (40.60)
ISO/DIS 13585, Brazing — Qualification testing of brazers and brazing operators (40.20)
ISO/DIS 14918, Thermal spraying — Qualification testing of thermal sprayers (40.20)
ISO/DIS 17779, Brazing — Specification and qualification of brazing procedures for metallic materials (40.20)
ISO/DIS 22161-3, Aerospace series — Brazing and high-temperature brazing of metallic components — Part 3: Furnace, torch and induction brazing using silver alloys (40.20)
ISO/DIS 17660-1, Welding and allied processes – Welding of reinforcing steel — Part 1: Load-bearing welded joints (40.00)
ISO/DIS 17660-2, Welding and allied processes – Welding of reinforcing steel — Part 2: Non-load-bearing welded joints (40.00)
ISO/DIS 20471, Protective clothing — High visibility warning clothing for high risk situations — Test methods and requirements (40.00)
ISO 13506-1:2024/CD Amd 1, Protective clothing against heat and flame — Part 1: Test method for complete garments — Measurement of transferred energy using an instrumented manikin — Amendment 1 (30.99)
ISO 13997:2024/CD Amd 1, Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects — Amendment 1 (30.99)
ISO/CD 11611, Protective clothing for use in welding and allied processes (30.99)
ISO/CD 18889, Protective gloves for pesticide operators and re-entry workers — Performance requirements (30.99)
ISO/CD 23388, Protective gloves against mechanical risks (30.99)
ISO/CD 23762, Protective clothing — Enhanced visibility warning clothing for medium risk situations — Test methods and requirements (30.99)
-, Gas welding equipment - Acetylene manifold systems used in welding, cutting and allied processes - Part 3: Manual quick-acting shut-off devices, safety requirements and tests (30.97)
-, Gas welding equipment - Acetylene manifold systems used in welding, cutting and allied processes - Part 4: Automatic quick-acting shut-off devices, safety requirements and tests (30.97)
-, Gas welding equipment. (30.97)
-, Non-destructive examination of welds - Ultrasonic methods - Examination of electron and laser beam welds in steels (30.97)
-, Non-destructive examination of welds - Ultrasonic methods - Examination of welds in aluminium and aluminium alloys (30.97)
-, Welding - Joint preparation for welding of clad materials (30.97)
-, Welding - Quality assurance in mass production - Part 2: Resistance welding (30.97)
-, Welding - Test for shop primers in relation to weldability (30.97)
-, Welding consumables - Welding consumables for gas welding of creep-resisting steels - Classification (30.97)
CEN/TC 121/SC 3 N 273, Welding consumables - Rods, wires and deposits for tungsten inert gas welding of high strength steels - Classification (30.97)
CEN/TC 121/SC 5B/WG 2 N 102, Non-destructive examination of welds - Ultrasonic methods - Examination of welds in austenitic steels (30.97)
CEN/TC 121/SC 5B/WG 2 N 79, Non-destructive examination of welds - Ultrasonic methods - Automatic examination of welds in metallic materials (30.97)
prEN 13916, Fire resisting doorsets - Requirements and classification (30.97)
prEN 1395:1996 rev, Thermal spraying - Acceptance inspection of thermal spraying equipment (30.97)
ISO/CD 13994, Clothing for protection against liquid chemicals — Determination of the resistance of protective clothing materials to penetration by liquids under pressure (30.60)
ISO/CD 15614-15, Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 15: Manufacturing material using wire with direct energy (30.60)
ISO/CD 17846, Welding and allied processes — Health and safety — Wordless precautionary labels for equipment and consumables used in arc welding and cutting (30.60)
ISO/CD 25249-2, Corrosion protection of offshore wind structures — Part 2: Primary steel components — general requirements for thermal spraying and painting (30.60)
ISO/CD 2553, Welding and allied processes — Symbolic representation on drawings — Welded joints (30.60)
ISO/CD 3821, Gas welding equipment — Rubber hoses for welding, cutting and allied processes (30.60)
ISO/CD 6530, Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids (30.60)
ISO/CD 25491, Laser surface treatment and related coatings — Terminology, Classification (30.20)
ISO/CD 17632, Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels — Classification (30.00)
ISO/WD 25892, Powder coating by atomic layer deposition — Specification and test methods (20.60)
ISO/WD 26273, Non-metallic coatings--Measurement of thickness--Terahertz method (20.20)
ISO/AWI 14113, Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (20.00)
ISO/AWI 14114, Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — General requirements (20.00)
ISO/AWI 17634, Welding consumables — Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels — Classification (20.00)
ISO/AWI 20010, Metallic and other inorganic coatings- Determination of volume fraction of monoclinic phase in yttria stabilized zirconia of thermal barrier coatings by X-ray diffractometry (20.00)
ISO/AWI 25263, Classification and Specification of Thermal Spray Seal Coatings for Gas Turbines — Low-temperature Applications (20.00)
ISO/AWI 25976, Metallic coatings — Technical requirements and testing of metallic laser cladding coatings (20.00)
ISO/AWI 26180, Vitreous and porcelain enamels--Determination of adhesion rate of electrostatic dry powder bisque coating (20.00)
ISO/AWI 26274, Specifications and requirements for laser cladding coatings on key components of thermal power generation equipment (20.00)
ISO/AWI TR 19382, Protective clothing - Approaches of human validation for comfort evaluation during practical performance tests (20.00)
